Cours:PiPico

Brochage

https://datasheets.raspberrypi.com/pico/Pico-R3-A4-Pinout.pdf

utilisation de l'ide arduino

https://github.com/earlephilhower/arduino-pico

non recommandé : QtCreator

Création assistée d'un projet

À l'aide de pico_project.py :

• git clone https://github.com/raspberrypi/pico-project-generator.git
• ./pico_project.py --gui
• ne pas cocher "create VSCode project"

Attention, ne pas oublier de spécifier le chemin vers le SDK :

• export PICO_SDK_PATH=../../pico-sdk en remplaçant ../../pico-sdk par le chemin vers le SDK.

Ouverture avec QTCreator

QtCreator est capable de lire et interpréter le fichier CMakeLists.txt comme descripteur de projet, il suffit donc

• d'ouvrir (comme projet) le fichier CMakeLists.txt

VsCode

• installer VsCode
  • https://doc.ubuntu-fr.org/visual_studio_code
• ajouter le plugin pi pico
  • https://github.com/raspberrypi/pico-vscode
  • https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf

Registres

gpio

#include "pico/stdlib.h"
#include "hardware/regs/addressmap.h"

unsigned int& gpioOUT = *(unsigned int*) (SIO_BASE + 0x10);
unsigned int& gpioOE  = *(unsigned int*) (SIO_BASE + 0x20);

unsigned int& gpioCtrl0 = *(unsigned int *) (IO_BANK0_BASE+0x4);
//facultatif
unsigned int& padsBank0_GPIO0 = *(unsigned int *) (PADS_BANK0_BASE+0x4);


int main() {
    // facultatif
    padsBank0_GPIO0|=(1<<6); // input enable
    padsBank0_GPIO0&=~(1<<7); // output disable
    // piloter la broche avec fonction SIO
    gpioCtrl0=5;
    // sortie enable
    gpioOE=1<<0;
    while (true)
    {
        gpioOUT&=~(1<<0);
        sleep_ms(200);
        gpioOUT|=(1<<0);
        sleep_ms(10);
    }
}

GPIO

https://www.raspberrypi.com/documentation/pico-sdk/hardware.html#hardware_gpio

Syntaxe	void gpio_init(uint gpio)
Paramètres	gpio numéro de gpio

• gpio_put(LED_PIN, 1);
• gpio_set_dir(LED_PIN, GPIO_OUT);
• gpio_set_pulls (uint gpio, bool up, bool down)

Pwm

https://raspberry-pi.developpez.com/actu/344283/Raspberry-Pi-Pico-moins-Apprendre-a-generer-des-signaux-PWM-un-billet-blog-de-f-leb/

Fmli = Fcpu / ( wrap * clkdiv ) // sur pi pico, Fcpu=125MHz

• clkdiv:
  • Le registre qui stocke le diviseur de fréquence comprend 8 bits pour la partie entière, et 4 bits pour la partie fractionnaire
  • valeur max de clkdiv : 255 + 15/16
  • ex : pwm_set_clkdiv_int_frac (slice, 38, 3); // diviseur de fréquence = 38 + 3/16

• gpio_set_function(PICO_DEFAULT_LED_PIN, GPIO_FUNC_PWM);
• uint slice_num = pwm_gpio_to_slice_num(PICO_DEFAULT_LED_PIN);
• pwm_config config = pwm_get_default_config();
• pwm_config_set_clkdiv(&config, 4.f);
• pwm_init(slice_num, &config, true);
• pwm_set_gpio_level(PICO_DEFAULT_LED_PIN, fade * fade); // rapport cyclique 16 bits

I2C

i2c scanner

#include <stdio.h>
#include "pico/stdlib.h"
#include "hardware/i2c.h"
#include "hardware/timer.h"
#include "hardware/clocks.h"
#include "pico/binary_info.h"


int64_t alarm_callback(alarm_id_t id, void *user_data) {
    // Put your timeout handler code in here
    return 0;
}



bool reserved_addr(uint8_t addr) {
    return (addr & 0x78) == 0 || (addr & 0x78) == 0x78;
}
int main()
{
    stdio_init_all();

    // I2C Initialisation. Using it at 400Khz.
    i2c_init(i2c0, 100*1000);
    
    gpio_set_function(PICO_DEFAULT_I2C_SDA_PIN, GPIO_FUNC_I2C);
    gpio_set_function(PICO_DEFAULT_I2C_SCL_PIN, GPIO_FUNC_I2C);
    gpio_pull_up(PICO_DEFAULT_I2C_SDA_PIN);
    gpio_pull_up(PICO_DEFAULT_I2C_SCL_PIN);
    // For more examples of I2C use see https://github.com/raspberrypi/pico-examples/tree/master/i2c
    bi_decl(bi_2pins_with_func(PICO_DEFAULT_I2C_SDA_PIN, PICO_DEFAULT_I2C_SCL_PIN, GPIO_FUNC_I2C));

    // Timer example code - This example fires off the callback after 2000ms
    add_alarm_in_ms(2000, alarm_callback, NULL, false);
    // For more examples of timer use see https://github.com/raspberrypi/pico-examples/tree/master/timer

    printf("System Clock Frequency is %d Hz\n", clock_get_hz(clk_sys));
    printf("USB Clock Frequency is %d Hz\n", clock_get_hz(clk_usb));
    // For more examples of clocks use see https://github.com/raspberrypi/pico-examples/tree/master/clocks

    while (true) {
        printf("\nI2C Bus Scan\n");
        printf("   0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F\n");
    
        for (int addr = 0; addr < (1 << 7); ++addr) {
            if (addr % 16 == 0) {
                printf("%02x ", addr);
            }
    
            // Perform a 1-byte dummy read from the probe address. If a slave
            // acknowledges this address, the function returns the number of bytes
            // transferred. If the address byte is ignored, the function returns
            // -1.
    
            // Skip over any reserved addresses.
            int ret;
            uint8_t rxdata;
            if (reserved_addr(addr))
                ret = PICO_ERROR_GENERIC;
            else
                ret = i2c_read_blocking(i2c_default, addr, &rxdata, 1, false);
    
            printf(ret < 0 ? "." : "@");
            printf(addr % 16 == 15 ? "\n" : "  ");
        }
        printf("Done.\n");
    
        sleep_ms(1000);
    }
}

read/write register

void writeI2cReg(uint8_t targetAddress, uint8_t regAddress, uint8_t regValue)
{
    uint8_t data[2]={regAddress,regValue};
    i2c_write_blocking(i2c0,targetAddress,data,2,false);
}

uint8_t readI2cReg(uint8_t targetAddress, uint8_t regAddress)
{
    i2c_write_blocking(i2c0,targetAddress,&regAddress,1,true);
    uint8_t regValue;
    i2c_read_blocking(i2c0,targetAddress,&regValue,1,false);
    return regValue;
}

pio

ws2812

https://github.com/ForsakenNGS/PicoLED

liens

• https://www.gibbard.me/using_the_raspberry_pi_pico_on_ubuntu/
• https://tutoduino.fr/en/pico-platformio/
• visual studio code :
  • https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf partie 7.1
  • https://www.electronicshub.org/program-raspberry-pi-pico-with-visual-studio-code/
• https://github.com/raspberrypi/picotool